Radioactive Contamination

Radioactive-Contamination

ALL RAW MATERIALS USED TO MAKE OUR STEEL AT AMBICA STEELS ARE SCANNED AND TESTED FOR RADIOACTIVE CONTAMINATION EVEN BEFORE THEY ENTER OUR PREMISES.

Ambica Steels has always been well aware of its responsibility of delivering the radiation-free products to its customers, and to endorse this principle the management had bought 2 radiation dosimeters almost eight years ago (Environmental Radiation Dosimeter is the instrument that is used to check the presence of radioactive contamination like photons & Gamma Radiation in steel scraps).

Today, the company is also using RAD detectors with external sensors. These instruments can measure faster and can measure much lower contamination levels with a higher degree of accuracy. This is in addition to Ambica’s laboratory for the measurement of radiation thru identification of nuclides (gamma spectroscopy with multi-channel analyzer). The quantification is shown in Bq/g and Bq/Kg. At Ambica, each delivery of scrap is tested for radioactive contamination, which ensures that of all its raw materials are free from radioactive contamination. This procedure is being followed for the last 8 years. Besides, our state-of-the-art radiation check equipment installed at our entry gates ensure that all incoming/outgoing materials are free from contamination and provides a radiation free atmosphere for our employees are work in.


ENQUIRE NOW

AMBICA STEELS LIMITED

C-54/1 WAZIRPUR INDUSTRIAL AREA

                      NEW DELHI 110026

(+91) 011-47034400

info@ambicasteels.COM

March 23, 2020

SUBJECT: IMPACT OF COVID-19

Dear Sir/Ma’am,

At the moment we are all dealing with the spread, consequences and the measures taken by our respective governments to contain and fight back against the Corona Virus. We as Ambica, feel it is our duty to contribute towards such efforts.

From today, i.e. 23rd march 2020, we are observing the lockdown orders issued by the respective state governments. We have therefore taken several measures  within our organization that have an impact on the way we work until 31st of March 2020.

The following are the changes that have been initiated by our management:

  1. Availability of Our Production:
    • All our production sites shall remain non-operational until the 25th of March 2020. It may then continue with limited possibilities after the 25th of March 2020. We shall send out updates as the situation develops.
    • Material movement is going to be restricted and any urgent matters will have to be dealt with on a case to basis in a creative manner.
  2. Availability of Our Sales Department:
    • Our Sales team shall not be available for in-person visits, however, shall continue to be operational from home and are always reachable at their respective email addresses and phone numbers.
    • Any and every query you may have regarding your orders cna be sent to your respective account managers.

We regret the inconvenience caused and hope that we are able to resume full operations once it is safe to do so.

We ask and trust your understanding and hope that with these measures we have done the best we can do to make a proper contribution to limiting the further spread of the Corona Virus.

Sincerely,

ABHINAV GUPTA ( DIRECTOR)